|
Coaxial Cables
50% of new antenna
installations have feedline trouble!
Don't compromise your next installation with a questionable
coaxial cable. High quality coaxial cable assemblies are made with only
the best materials. Connectors are soldered, not
crimped. All cables are tested at RF, not just continuity checked like
others.
20W field radios - RG-8X (mini) is a
thin, light cable for field use. It weighs about 4 lbs per 100 feet.
Available with BNC connectors for your PRC-150 or similar. (Do not use this cable
over 20 watts, or over 100 feet.)
Base and amplified radios - 9913 superflex 50 ohm low loss
cable, with type 'N'
male connectors. This cable can be directly buried and is UV
resistant. Use this cable with VRC-100 and other higher power radios.
Choose the
proper cable, connector and length from the table in the price list section of this
website. Other lengths and connector options available. Contact us
with your requirements.
- Interseries Coaxial Adapters
Use to connect varies cables with antennas
and radios.
| HNM-NF |
Interseries Coax
Adapter, HN male to N female
Change output of VRC-100 to standard N
conn |
| UG-83 |
Interseries Coax
Adapter, N female to UHF male |
| UG-146 |
Interseries Coax
Adapter, N male to UHF female |
| UG-201 |
Interseries Coax
Adapter, BNC female to N male
Connects
most field radios to an antenna with N connector. |
| UG-273 |
Interseries Coax
Adapter, BNC female to UHF male |
| UG-349 |
Interseries Coax
Adapter, N female to BNC male |
 |
Coax Seal
Seals coaxial fittings from moisture
and corrosion. Simply form the hand moldable plastic over your
antenna coax connection to ensure moisture stays out and SWR stays low.
|
Premium Antenna Wire
Copperclad Steel and Stainless
Steel
The ideal wire for making antennas. Choose from hard drawn
copperclad steel (with a full 40% copper content), or pure stainless steel.
Both are custom made for us, with 7 strands of 22 gauge making a 14 gauge
conductor.
There are many different wires offered on the market.
Everyone claims that their wire is the best. What makes ours so good? After
more than 70 years in the business, we should know! The wind rating on our
folded dipole antenna is 100 MPH with two supports, 150 MPH with 3 supports.
Don't let the next
storm claim your antenna because you used the 'wrong' wire.
AW - Copperweld Wire
AWS - Stainless Steel Wire
Order in increments of 100 feet
| |
Solid
Copper |
Stranded
Copper |
Copperweld |
Stainless
Steel |
| Pull
Strength |
Fair |
Poor |
Excellent |
Excellent |
| Stretching
& Loosening |
Fair |
Poor |
Excellent |
Excellent |
| Corrosion
Resistance |
Good |
Good |
Good |
Excellent |
| Wind
Breakage |
Poor |
Good |
Excellent |
Excellent |
| Cost |
Very
High |
Very
High |
Low |
Very
High |
Copyright © 1997 - 2008
Barker & Williamson - All rights reserved |
