|
|
Composite Fiberglass Manpack Mast Kits |
|
||||||||||
Rapid Forward DeploymentManpack - NVIS
Specifically Designed for Man Pack Use Barker & Williamson's manpack mast system, together with our manpack broadband antenna, provides full HF communications capability in one small, light, rapidly deployable kit. The entire mast system comes in one camouflage bag that is 22" x 10" x 10", and weighs 17 lbs. Focused on operating NVIS propagation, the three pole mast set will hold our folded dipole antennas at 6 feet of height in a flat top configuration. This will allow no skip operation within approximately 250 miles, over all terrain and structures. Mast pole sections are a very short 18 inches. They are rapidly field assembled with an inner joiner piece by just pushing them together. Unlike our longer masts, these have no need for locking pins as there is no safety hazard at 6 feet of height. A locator pin is hammered into the ground to stabilize the bottom of the assembly. A guy ring is placed on top, and lines run down to ground stakes. The preassembled guy lines have easy to use tensioners and snap hooks. The material utilized for the pole sections is a composite known as FRP - fiberglass reinforced plastic. Unlike cheap "fishing pole" material it is extremely lightweight, strong, and rigid. The color is throughout the material - no chipping paint. Also, shock hazards are eliminated. Other features include bottom locating pins turned from aircraft aluminum, and ultra-strong aluminum ground stakes to avoid rust. All guys and lines utilize polyester, which won't stretch, rot, or degrade in UV. As usual, B&W brings you the best!
MAST ONLY MK114-306MP-S - Sand Camouflage MK114-306MP-G - Green Camouflage
Specifications:
Copyright © 1997 - 2007 Barker & Williamson - All rights reserved |
||||||||||||